Four types of models according to the application
Since this is a manual machine, it can be tableted from a single tablet.
Compact design and no need for electricity. A tableting test is available even with a small amount of samples. Ideal for obtaining initial tablet samples.
Application
example
- pharmaceutical
-
supplement
mint tab
- chemical
-
ceramic
catalyst
HANDTAB SERIES
-
Available for a full-scale tableting with space-saving
Use a special tableting mold that is easy to install.
It is the most standard model for small-diameter tablets.spec
-
For tablets with a hole in the center
The function to produce ring shaped tablets with a hole in the center is added to HANDTAB-100
spec
-
For TSM tooling
Since TSM tooling can be used, there is no need to newly arrange toolings
spec
-
For large tablets
It can be tableted up to 50 mm in diameter.
The maximum pressure is 150 KNspec
standard equipment
-
Hydraulic cylinder & pump
Since it is powered by a manual hydraulic pump, full-scale forming is available.
-
Analog pressure gauge
Safe tableting is available while checking pressure.
-
Interchangeable tooling
Various types of tablets can be produced by changing tooling.
option
-
Precise pressure gauge of load cell system
By installing a load cell (pressure measurement sensor), more accurate tableting pressure can be measured.
-
Graduated filling depth adjustment function
A graduation is added to the powder filling depth adjustment function.
-
Stainless steel specification
Standard specifications are electroless nickel plating on iron-based steel.
When tableting mainly powders with corrosive properties, please select the stainless steel specification.Expansion of maximum tablet diameter
The maximum tableting pressure remains standard, and only the maximum tableting diameter can be expanded.
Procedure of operation
- Powder filling
- Setting filling depth
(Lower punch) - Lower the upper punch
- Pressurize with a hydraulic pump
- Remove pressure and raise upper punch
- Raise the lower punch with hydraulic pump and take out the tablet
- Completion
spec
| Model |
HANDTAB-200
|
HANDTAB-100
|
HANDTAB-100R
|
HANDTAB-100T15
|
|---|---|---|---|---|
| Maximum pressure | 3tf (30KN) | 15tf (150kN) | ||
| Number of tools | 1 piece | |||
| Tool type | TSM・IPT-B/D | special tabletting | ||
| Maximum tablet diameter | 23mm | 16mm | core rod tab : 20mm ordinary tab : 16mm |
50mm |
| Maximum filling depth | 18mm | 46mm | ||
| Weight of body | main unit17kg / pump3.5kg | main unit 16kg / pump3.5kg | main unit17.5kg / pump3.5kg | main unit35.5kg / pump10kg |
| Dimensions of main unit | 200(W)×200(D)×680(H) | 200(W)×200(D)×550(H) | 200(W)×200(D)×620(H) | 200(W)×200(D)×700(H) N50type 760(H) |
| Installation space | About 500(W)×700(D) | About 600(W)×800(D) | ||
| Main equipment | Analog pressure gauge | |||
